Main accessories of floating dock 1. Steel Frame / Aluminum alloy Frame/concrete Frame/Pontoon 2. Dock Decking 3. Handrail 4. Gangway 5. Other accessories(Pile GuideSafety EquipmentSafety access gateSafety LadderBoat lift and so on)

1.low reaction force and high capability of energy absorption. 2.less surface pressure onto the side wall of ships.(the capability of accepting surface pressure of the fender is up to 14ton/m2) 3.no reaction on the performance of compression when inclined. 4.suitable for areas with large or small tides. 5.suitable in cold weather because the compressed air as buffering medium. 6.expecially in mooring of large scale ships in sea docks and lightering.

The Plastic pontoon of the construction can adapt to any specific lakeside residents needs and can be assembled to correspond with the shape or size you have in mind. Plastic pontoon is made of high-density polyethylene. It can resist shocks, climate changes, bad water and sun conditions as well as to a large range of chemical products. Do not oxidize or deteriorate in any way. So the water environment where the pontoon is floating will stay perfectly clean.

Anchors such as Hall Anchor, Spec Anchor, Pool Anchor, Delta Anchor, AC-14 Anchor, Stockless Anchor, Navy Anchor, Four Fluke Anchor

China largest High Holding Power AC-14 Hhp Stockless Marine Anchor factory, manufacturer,supplier,stockist,for sales .abs,lr,bv,dnv,ccs,kr,nk.all IACS, AC-14 Hhp Anchor;Hhp Stockless Anchor;High Holding Power Anchor;super long warranty

* Reasonable compact structure design * Small size, light weight * Nice appearance * Perfect starting and working efficiency * Large torque and good stability * Less noise * Easy and safe operation, * Perfect erosion resistant coating, * Easy installation and low maintenance

Construction: 1. Conductor: tinned copper 2. Insulation: EPR /XLPE 3. Tape 4. Individual screen: tinned copper wire braided 6. Inner sheath: PCP/PO (SHF1, SHF2) 7. Screen/Armored: tinned copper wire braid (Galvanized steel wire braided) 8. Outer sheath: PVC/PO (SHF1, SHF2)

High energy absorption and low reaction force and surface pressure • No decline in the rate of energy absorption when obliquely compressed, under normal circumstances, and uniform •surface pressure for any contact area. • Low reaction force to prevent damage from repeated impacts against the hull of ship, quay, jetty or mooring rope. • Ability to float and thus rise and fall with the ebb and flow of tides and the movements of a ship. • High standard of uniform quality in compression performance with no deterioration of the rubber. • Easy installation.