Square Type Rubber Fender
1,Material:NR,EPDM
2,Used for docks,vessel,tugboats etc.
3,Convenient in installing
3 Front panel set in the margin of fender, it can lower the surface pressure of the vessel side board, the surface pressure can be controlled at below 200KN/M .
2. Easily for installation.
3. Applicable for frame dock and ships due to the smaller bottom width.
2. High effectiveness and economical
3. Good shear force resistance
Material: | |
---|---|
Type : | |
Function: | |
Quantity: | |
1. Square type marine rubber fender are supplied in DD,DO, and solid shapes. These Long length fenders can be supplied to all kinds of docks, quays, and ships.
2. High energy absorption capacity, thus minimizing the face contact.
3. Easily be installed by means of anchor bolts.
Feature:
1. Material: Natural Rubber
2. High energy absorption and Reasonable reaction force.
3. Specifications are avaliable upon request
4. The fender is applicable for all kinds of docks,quays,and ships.
5. Good performance during angular berating.
Technical Parameter
Type B x Φ | Specification (mm) | ||
B | Φ | L | |
150 x 75 | 150 | 75 | 500 ~ 3000 |
200 x 100 | 200 | 100 | |
250 x 125 | 250 | 125 | |
300 x 150 | 300 | 150 | |
400 x 200 | 400 | 200 | |
500 x 250 | 500 | 250 |